Production Mode

My hands were wet all weekend. I now have a severe case of lizard skin. I spent about 3 hours on the wheel on Friday night, again on Saturday night and then a full 7 hours on Sunday. It felt like I got a lot more done than the picture says I got done. However, I threw all the mugs on Friday and Saturday, trimmed and handled them all on Sunday. The teapot is to go with the short mugs and was thrown on Saturday and then trimmed/assembled on Sunday (required a torch to get it stiff enough). This shot shows all that I made/completed over the weekend.

Here is a shot of all the mugs (19 in all). The short little guys are new for me and I am really liking their simplicity.

This bowl was thrown on Sunday and will have a few handles stuck on the rim.

Finally, this teapot is not my normal bulbous style. I figured I needed something that matched the mugs, so here it is.

I am focusing on resupplying one of the galleries I have neglected over the past while since the flood. I just never seemed to have the time or energy to devote to it. Next will be some more large bowls, serving platters, casseroles etc

Fairview Studios 2012 Christmas Sale

Now that I am back from my quick trip to Kentucky, I should let you all know that Fairview Studios will once again have their annual Christmas Sale on Saturday November 24th from 9am to Noon. There will be early bird draws to get you in earlier than the rest and door prizes as usual. I highly recommend this sale. It has been running non stop since before the dawn of time, well, probably the late 70's, but you would need to ask Dave about that. I hope to see you there!

I wish...

That there was a way to make money from procrastination. If there was, I would be soooo rich.
I have put off the inevitable, and now I am down to 1 night (the night before I go away) to clean my house (do all my dishes, throw out all the crud that has accumulated over the last little while, do laundry etc and pack for my trip. I can't do it tonight as I am teaching...so tomorrow it is. At least my flight does not leave until Noon, that should give my laundry time to fully dry before I pack it. Did I mention that my dryer is still toast? Yes, It died a while ago and as the subject of this post may suggest, I have put off getting it fixed. I seem to be doing ok without it though, less energy waste anyway.

I got around to updating my musical selections for the trip, but in the process, I managed to delete almost my entire iTunes library and had to redo it all. So while doing that, I got rid of all my duplicate songs and there seemed to be a lot of them for some reason. While I was at it, I updated my ipad software as well (that was long overdue, iOS6 has been out for a while). I was up a little bit past my bed time, that's for sure. I never really took a look at how much music I really have and was amazed, especially considering that I only listen to a fraction of it. Next, I need to update my phone and get that all sorted out. Other than that, I am ready to go (HA). I'm not sure where I got my procrastination genes from (probably my Dad, it sure wasn't from either set of Grandparents. The moss never grew under their feet, that's for sure.  My mum is one of those people that is ready to go at least a week or two before leaving, so I can't blame her either. I am an always on time and somewhat annoyingly early person (I don't do fashionably late), but I'm never really ready to go until the last minute.

Anyway, tonight I will be teaching, and at least I know what I am demonstrating well in advance of the class (not normal). I will make one of those altered serving dishes I posted about yesterday. I will scale it down so that it is not so overwhelming for the students. It can be tricky to manoeuvre the bottomless walls onto the slab bottom for both the marking and attaching phases, so we will start small (small for me that is).

Can't we all just slow down a bit?

I’m sure this has already been written about a zillion times, but here is my take on it as it pertains to a craft that is by its very nature, slow.

Ever since the introduction of the personal computer and by extension, the internet, our lives have become a bit more hectic (as if you needed me to tell you that.). Every time you turn around now, the new technology that just came out is obsolete. It also seems that along with the increased pace of turning out the newest, fastet, smarter gadget, so too has our desire to be instantly gratified. Everyone wants what they want now, not tomorrow, and definitely not next week or next month. OK, so what’s my point?

Well, here it is. I got a referral last week for an order of approximately 24 personalized mugs. Sounds great and I have no issues doing small orders as that is usually all I have time for. They wanted oversized coffee mugs with a specific text stamped either on the side or the bottom. Again, not a problem. I did mention that I usually require about 1 month to complete these types of orders. They came back to me and said that they needed them by June 28th. I agreed, as it was not that far off from the month that I would usually require and as luck would have it, I had already thrown 10 mugs the previous weekend but had yet to trim or attach handles, so they would work. My issue is not by any means with this particular order, but it did cause me to reflect on the reality of making pottery by hand (vs machine) and what the general buying public seems to expect when it comes to the hand made vs the machine made product.

I have run into this scenario a few times:

Customer: “I was wondering if you could make me a gift for a wedding present.”

Me: “Sure, no problem, when is the wedding, or when do you need to have it by?”

Customer: “Next week, Friday at the latest.”

Me: While trying not to choke “Um, no, I can’t do it by then, but would you like to look at some of the stuff I have that is already finished?”

Customer: “I was hoping to have it personalized with their names and the date of the wedding, so no. How come you can’t make it by Friday?”

You can see where I am going with this. There is a perception out there that what you want/need now, should just be available to you whenever you want it. For these people, I am very glad that Wally World and other similar purveyors of crap exist.

The slow process of making pottery is not meant for this type of consumer. I have tried to explain to more than a few people, when they ask how long it takes to make something, that it is more than just the making. I could say “Oh, about a minute”, but that would only apply to the initial throwing of the basic form. I could also say “ about a month” as that is sometimes how long it takes for things to dry, trim, attach handles, dry some more, bisque fire, glaze, fire again”, or (in my case) I could say (and I know they never really get this) “12 years”, to which I usually get blank stares.

I even had someone question why it took me so long, because they were able to pick up the mugs they made with their kids at the u paint it place the day after they did them.

I don’t think she saw my eyes roll to the back of my head…

So, not to be a Luddite or anything, but there seems to be an odd overlap of wants and expectations born from the mechanized mass produced world, with the hand made world. To me, it seems that the consumer must be unconsciously thinking “I want to buy a unique, hand made object that means more to me than what I can buy at the big box store, but I don’t want to spend too much, and I don’t want to have to think ahead and just be able to pick it up off the shelf as soon as I need it”. They want the best of both worlds, and I am sorry to say, at least in this, you can’t have your cake and eat it too. I also don’t believe that this could be a conscious thought pattern, it’s just too ridiculous, but if it is, then there is really something wrong with our world. It kind of reminds me of an open air street fair that I had a booth in a few years ago. People were more than willing to shell out $15-$20 for non permanent tattoos, but not for a hand made mug that would last way longer than the tattoo they paid too much money for. My booth was right beside the tattoo tent, so I was a wee bit bitter by the end of the day. I guess a mug was just too cumbersome to carry around while drinking beer and getting a fake crappy tattoo.

Perhaps I get too wrapped up in the beauty of a well made object and tend to expect the same of everyone else. I mean, what is better than a handle on a mug that was lovingly attached in such a way that it looks and feels as if it was designed for your hand to hold, and not 3 billion other hands as well? (this is what I was doing on Saturday – lovingly attaching curvaceous and uplifting handles, back filling the attachment points to give visual balance to the overall piece, wiping away the drool …).

So back to my point, if there even really was one. I think we need to slow down, expect that something of quality will take time, not be in such a rush and accepting mediocrity as the price for immediacy.

And another one before bed...

I must be crazy...

One before bed

I applied a black slip tonight and then spent the evening after I got home shellacking the pattern and dotting the dots then wiped back the slip to reveal the white clay underneath. Now to bed to dream of dots and swirls.

Dodging Murphy's curve ball

It might just work out in the end, but its gonna be tight (just like OJ's glove). The kiln is getting a new element today (fingers crossed) and then my stuff will be re-fired tonight. So Friday I will be unloading that kiln, then pricing and cataloguing everything else. it's gonna be a long Friday night.


I must say that even though everything was just a tad bit under fired, the glazes looked OK. I still want to refire though, the feet felt a little dry and the glazes were not 100%. The gloss liner glaze was satin, the translucent brown had a purple/bluish haze with little depth, the black and rutile slip on my bas relief stuff did not develop as nicely as it has in the past (begins to react with the glaze and forms a milky opalescence where the glaze pools) and again, the F96 brown clay was still quite orange. I always worry with a refire that the glazes will run off the pots and stick to the shelf. They had already started to flow the first time round, and now will be subjected to a full firing again. Luckily, most of my feet are quite substantial. I love a nice fat foot. However, I have several tall jars and vases that have flat bottoms and the glaze stops quite close to the bottom. Everything should be ok, but you never know.

So, if all goes well, I will have everything priced and packed on Friday night. If I don’t sell anything, then on Sunday I will be posting a whole bunch of stuff on Etsy, so look out...