Village at night

I picked up some battery operated tea lights and hot glued them into place last night. So here is the completed village all lit up. The lights flicker and it kinda makes it look like all the little houses are on fire inside.

Almost done

This little "village" started on a whim and was inspired by these:

In turn, these pots with the houses were inspired by Dr. Seuss and his Who's. So I guess this is my interpretation of Whoville. The only thing left to do, if I can engineer it of course, is to build a little bridge and stick it in the middle so that it joins both sides of the river valley. This whole piece was created out of Plainsman Clay's new cone 6 translucent porcelain body called Polar Ice. As it is going to have a high degree of translucency, I bored holes under each house so that I can insert some little electric tea lights to illuminate them from within. my fingers are crossed that this doesn't just crack all over in the bisque, or that the trees don't topple over in the glaze...

Condo Status and Other More Interesting Stuff

Firstly, for all of you out there that are wondering if I will be home for Christmas, the answer is NO. The engineer report regarding the source / solution to the water that mysteriously showed up in my unit on October 17th just came in and they don't have a clue where it came from. We have theories, but nothing concrete. The next step is to recreate the water testing that occured several days prior to the water appearing in my unit. The plumber was in running water in the 3 units above me to find out why there were drastic temperature changes. It is my understanding that they had all taps open and running, toilets were being flushed etc. In the end, they found out why the temp was changing, but it is my belief, but then again I'm not a plumber so what do I know, that this led to the water leaking into my unit on the main floor. This may or may not reveal a cause, but the solution to prevent any future water issues in my unit is to dig a trench in my floor that leads to the sump pump in the mechanical room, probably several feet down, lay down a perforated drain (aka weeping tile), cover with gravel and then patch the floor and then fix my unit. This should take any excess water that collects and divert it to the sump. When? How much $$? Who knows. I just know that it wont be complete before the end of the year, so my guess is that it will take until at least February. But again, just a guess.

In other non stressful areas of my life, seeing as how I don't have a home to call my own that I can actually go to every day, I have been putting my mental energy into ruminating about the possibility of entering a large craft show for next year's Christmas shopping season. I thought about a spring show, but the deadlines are already coming up for those. I know this will be a lot of work, but I won't know if this is a good fit for me unless I at least give it a shot. So, with that in mind, I am getting a jump on it before the registration deadlines come and go. My biggest concern is that I don't have a real display for my work, I have only ever really done the Fairview pottery show and it is such a crazy show that we could probably get away with just putting it all on the floor in the middle of the room and let the customers dig through it like a discount bin in a big department store (we never would, but you get the picture). So, the hunt is on for an inexpensive and portable display solution and I think I may have found it. I located some basic pine boxes made from 1x2s with solid end panels with routered out handles. As they are unfinished, I need to find a way to fancy them up so they look presentable. Milk paint was my first thought. The big hardware stores don't carry that stuff though. There are some specialty wood working and ECO stores in town that do, but I don't want to buy the quantity they sell it in. I just found a Canadian manufacturer that sells test size amounts that would in fact cover a couple of these boxes, so with the thought that I would be getting at least 6 pine boxes (I picked up 2 last night) I bought 6 different colours in the test quantity and they should arrive in about 5 days. I will use bees wax to help distress and then use a couple of colours on each box to give a weathered / antique appearance. I will then use the crates to create a shelving system of sorts by just stacking them like bricks in various combinations of height and spacing. Now I just need to make, make, make and hope I get accepted into one of these shows so I don't get stuck with too much inventory.

Now for the pictures, I always like a post with pictures. These are some of the things I have been working on over the last week.

This little diorama is a riff on the black and white sgraffito pots with the houses and trees. I plan to incise some detail into this super translucent porcelain in the hopes that I can figure out a way to illuminate the houses from inside (small battery operated tea lights maybe?) I also might add a little bridge and it needs some bushes etc...

I am also playing around with some bottles that would appeal to the scotch, bourbon, whiskey connoisseur, again thinking about possible show stock for next year. Good grief, we have not even had Christmas this year and I am already looking forward 12 months.

Translucent cone 6 porcelain

I have been mucking about with a new porcelain body. Plainsman Clays in Medicine Hat has been working on a cone 6 translucent body that would be comparable to Laguna Frost. They tested and came up with a body that appeared to throw well, but when they scaled it up to a full batch, the throwing properties were lost in translation. So they are back to the drawing board to tweak it to make it more throwable. That being said, I got my hands on half a box and did throw it. Whipped cream or pudding comes to mind when trying to describe it's consistancy. It did not stand up well, nor did it trim easily. I did however manage to get a few pieces made, mostly mugs. Here are a couple of examples of what came out of the kiln. I love the way it feels. Silky, smooth, fat etc etc etc. I like the finished result enough that I would try to fight another box of this into submission, and will definitely give their next revised batch a shot too.

This pic is of the inside of the little cup. I carved the bottom to see how that would show, and it does, quite well.
 

The little cup with the sgrafitto deco is not very thin, in fact the carving was not easy as the body is quite hard once it becomes bone dry. I really just wanted to know how it would take the OM4 terra sig and it feels really good, no fit issues that I can see.

A Weight has Been Lifted....Hallelujah

...Wait a second, nope, that was the stove shaped albatross. I had the junk removal dudes come by on Saturday to take my extra stove away as well as all the detritus on my patio. If you have ever wondered (although probably not) how long a person could live with a stove in their living room, then I can honestly say that 1.5 years is about as long as any person can stand it. I know, 1.5 years. It just flew by though. One minute in August I had 1 stove, the next I had 2, throw in a generous helping of procrastination, and you have 1.5 years of living with two stoves. It was pushed out of the way and was partially hidden under assorted pieces of pottery. It was as if I had an installation art piece in my condo that “...explores the human condition through it's dependency on electricity and lays bare the divide in western culture between function and art by juxtaposing the sad stove and hand made functional art....” or something. But really, it was just that I am hardly ever home during the day, and am often not home before 9:30 pm during the week and I am lazy (Sorry Mum, it's true, but I think you knew that already)

So Saturday was a write off, I worked until 3, went to let the junk guys in at 3:30 and that was pretty much it. Sunday I loaded a glaze with all those cups in my last post as well as a few other pieces and lots of other student work. I threw half a dozen mugs, slipped and scratched a bowl with a geometric pattern on the outside and my new Dr. Seuss inspired Who House motif on the inside, worked on a commission for another ceremonial firebowl, put a tea pot together and finished trimming a low wide bowl/plate. It too will be destined to have the Who Houses on the inside.

On Saturday I also took possession of my new tungsten carbide trimming tool and a 20kg bag of New Zealand Kaolin. The trimming tool is fantastic, but it will take me a bit to get used to it. I think it requires the pot to be a little drier than what I am used to trimming. The Kaolin will be something for me to play with over the holidays. I am going to try combining it with frit to make a low fire, highly translucent porcelain body. I am not 100% sure what I am going to do with it yet, but once I get my hands in it, the ideas will come (I hope).